Dielectric Switchboard Matting as per ASTM D178 /ANSI JS.7 Manufacturers
Electrical Switchboard Matting manufactured in corrugated rubber mat design used as a floor covering for electrical insulation to prevent shock around high voltage electrical panels, switchgear, control panels, fuse boxes, and heavy machinery as per ASTM D178 -93 Type I and ANSI JS.7 specifications produced by HIC Universal India exporters of electrical mats to USA, Australia, China, Qatar, Nigeria, Malaysia, South Africa, Colombia, Indonesia, Korea, UK.
Download Brochure Enquiry Now
Rubber Insulating Matting Specification as per ASTM: HIC Universal
Manufacturers of ASTM Type1 Rubber Insulating Matting conforming specification produced by HIC Universal in non-slip ribbed top surface and high grip cloth finished bottom design pattern electrical mat manufactured in India located Delhi and Uttar Pradesh factories in four different varieties of Thickness and Dielectric Test Voltage when new, designated as Class:-
Class 1 signifies (4.5mm / 20kV); Class 2 (6mm / 30kV);
Class 3 (9mm / 40kV); Class 4 (12mm / 50kV) respectively.
High quality Natural Rubber compound is used by HIC Universal in manufacturing electrical safety matting rubber product, fully tested as per American ASTM standards that covers full testing over the entire mat surface in well-equipped HIC’s Testing Laboratory and stamped on the reverse with identification coding.
Standard Sizes of Switchboard Matting manufactured (Width x Length): 900mm (36inch) x 9meter (30ft), 1000mm (1meter) x 1m, 1m x 2m, 1.2m x 2m and other sizes on request.
| ELECTRICAL SWITCHBOARD MATTING TECHNICAL SPECIFICATIONS: MADE IN INDIA * HIC | |||||
|---|---|---|---|---|---|
| Thickness of Safety Rubber Mat | ASTM D178-01 TYPE I / ANSI JS.7 Specification | Dielectric Test Voltage When New | Working Voltage (Nominal Maximum Use) | Surface Proof Test Voltage | Weight (Approx.) Kilograms per Square Meter # |
| 4.5mm (3/16") | Class 1 | 20kV (20,000V) | 7,500V | 10,000V | 6.80 kg/m2 |
| 6mm (1/4") | Class 2 | 30kV (30,000V) | 17,000V | 20,000V | 8.50 kg/m2 |
| 9mm (3/8") | Class 3 | 40kV (40,000V) | 26,500V | 30,000V | 9.20 kg/m2 |
| 12mm (1/2") | Class 4 | 50kV (50,000V) | 36,000V | 40,000V | 9.50 kg/m2 |
Color of mat: Black / Yellow Coding
HIC Lab Test Certificate of Insulating Matting forwarded with supplies
Third Party Inspection from an independently accredited India Test Facility, like by ERDA, CPRI, or other Govt. approved laboratory test certificate can be provided for switchboard matting on Extra charges to be directly reimbursed by buyer.
Warranty: Manufacturer warrantees switchboard matting to be free from manufacturing defects and shall replace or repair if found defective in workmanship within 90 days from the date of shipment.
Non-Conductive Switchboard Matting Suppliers in India, USA, EU, Africa, Middle East, CIS, Canada, Oceania
Switchboard matting manufacturers suppliers, HIC Universal, supplies in India, USA, EU, Africa, Middle East, CIS, Canada, Oceania after thorough in-house testing of non-conductive mats meeting & surpassing electrical current parameters as laid down in ASTM D178 -93 Type I standards to eliminate the electrical hazards of high voltage shock in the workplace, thus, provides protection to workers in factory. Safety rubber mat is not intended to be used as “Hot” Rail Blanket and, should be borne in mind, “Not to Place Insulating Matting in Service or Use with Cracks or Punctures” as can be dangerous in the event of electrical current leakage.
Disclaimer: Information’s, written and verbal are provided by HIC, relative to its electrical mat product which it determines to be reliable & no liabilities of whatsoever nature in regards to its uses. The purchaser of UNIVERSAL brand industrial rubber products should determine for itself the suitability of such products.
