Electrical Insulation Mat Installation
Thank You For Purchasing HIC UNIVERSAL Brand Electrical Insulation Mat Product and HIC International Co.’s Manufactured Quality natural rubber compounded Electrical Safety Mats superseding IEC 61111, ASTM D-178, IS 15652, IS 5424, BS 921 standards High Voltage Resistant & Anti-Slip Non-Conductive Insulating aspect Advantage assures Long Life Reliability.
Download Brochure
Enquiry Now
High Voltage Insulating Rubber Mats Safety Tips
Anti-slip Safety Floor Covering with insulation rubber mat around Electrical circuits having voltage rating above 220 V & up to 65,000 Volts (= 65 KV) to ground should be done with great precaution ensuring area is not wet while flooring wearing suitable protective equipment.
Absolute Sparks Protection even if small Blisters or pin holes, not the bigger ones, gets visible at times, nothing to interfere safety criteria.
Safe Shock Protection in the event of leakage of current for Voltage up to 50 KV is ensured for max up to 1 minute from insulation matting but more safety measures be taken against short circuits please, such as insulation gloves, rubber boots, arc shields etc. be worn to reduce possible electrical hazards near HT & LT voltage panel boards .
Better Workplace Safety is achieved by removing Water Accumulation at regular intervals under mats for added safety though excellent water absorbent. However, ensure electrical cables connection and insulation are proper in place while installation.
Maximum Skid Protection is ensured by using Textured/ Fine Ribbed/ Aberration Marks/ Chequered Finish of Insulating mats made of solid rubber black or grey or blue colour & high grip cloth impressions at bottom part.
Safe Thickness Minimum of Dielectric Carpet be used for Surface Proof Test Voltage of standard 1 m W x 2 m L dimension as per relevant quality standards:-
3 mm thick ( 5 KV proof) Class ‘0’ as per IEC 61111, for 1,000 V max. Working Voltage
4.5 mm thick ( 10 KV proof) Class ‘1’ as per ASTM D-178, for 7,500 V max. Working Voltage
2 mm thick ( 10 KV proof) Class ‘A’ as per IS 15652, for 3,300 V max. Working Voltage
6.5 mm thick ( 15 KV proof) as per IS 5424, for 3,300 V max. Working Voltage
For greater electrical shock safety, higher thickness mat up to 20 mm can be used depending upon HT & LT control panel area workers movement frequency to prevent early damage due to wear during installation.
Size Variation (+,-0.25 mm Thickness ; +,-1% Width & Length) as per HIC manufacturing tolerance should be acceptable.
